How To Make A Ferret Hammock Out Of A Pillowcase?

The hammock is a piece of extremely comfy equipment. It has kept people, and now animals delighted especially ferrets. But, of course, there’s the question that’s on your mind at the moment now.

How to make a ferret hammock out of a pillowcase?

Your pet ferret’s hammocks are not like human hammocks, they don’t need to be built by a professional. Using a pillowcase you can make a pouch or cube hammock. You need some essentials like ribbons, clips, thread, needles, and a sewing machine. Finally cut, place, and sew the pillowcases together. 

So, let’s get started on the hammock-making process. You can construct numerous sorts of hammocks. Don’t worry, we’ll go over each one separately.

Ferret Hammock in A Pouch Using A Pillowcase

Ferret Hammock in A Pouch Using A Pillowcase

For your small buddy, a pouch hammock made of a pillowcase is a comfortable solution. They’ll be able to tuck themselves in without becoming cold.

But it may get a little hot. So, you have to make it in size with your pet ferret. This also answers the question of how to make a small pet hammock.

The following are the supplies you’ll need to make this hammock:

  • Two lightweight old pillowcases (same size)
  • Four long pieces of cloth/ribbons
  • Four clips.
  • Thread, needle, and sewing machine
  • Pins
  • Scissors
  • Scale
  • Pencil or chalks

The pillowcases should be 12 by 24 inches in size. The finished product is approximately 9 by 10 inches. That’s why, rather than deciding on a size based on a blog, consider who you’re creating it for.

Step-by-Step Directions for Making a Pouch Hammock

Now, to construct a homemade ferret hammock, get the size right first, and then follow the steps below:

Step 1: Sewing The Fabric

Put the main fabric on top. Make sure they’re stacked on top before you start sewing. After that, sew the pillowcases together with a half-inch seam allowance. 

Keep an inch on the right mid-section of the cloth. This tiny hole will come in handy in the future. 

Step 2: Dividing The Fabric

To make it much easier to turn it inside out, cut a bit of excess fabric from the corners. This will ensure perfect sewn lines. And also, having no space being wasted with the excess fabric.

Now, cut the fabric in half and divide the two parts. You can also mark them with chalk and scale. That’ll help you make it perfect.

Step 3: Folding The Sewn Fabric

Put the hanging loops and clips in that location, or a little nearer to the pillowcase’s center. The loops ought to be on the outside and the clips on the inside. One side of the fabric should be folded over the loops.

Fold the fabric on the other side so overhanging the loop and slightly over the initial fold. Sew the loops and the horizontal sides together. Grab the hole and turn it right side out.

And that’s how you make a pouch hammock for your curious pet ferret.

Ferret Hammock in The Shape of Cube Using A Pillowcase

Ferret Hammock in The Shape of Cube

A patterned cube hammock is simply a cube hammock with a pattern. It’s a little difficult to build and requires additional fabric. Not only that, you won’t be able to make this with basic sewing skills.

Despite its complexity, the cube hammock is large and comfortable. It’s ideal for any sized ferret, as it provides extra space. You can also make a DIY ferret hammock no sew

Using a mini sewing machine will be of much help. There are a lot of brands making these machines. Here are some of the best that can be found in the market.

These will give you the best and safe experience and provides precision work.

You’ll need the following items to construct this hammock:

  • Six 11 by 11-inch-squares of flannel pillowcases
  • Six equal-sized fleece pieces
  • Four ribbons
  • Four clips
  • Pins
  • Scale
  • A circular object for tracing
  • Pencil or chalk

Now, let’s go through the steps of how to make a hammock for ferrets

Step-by-Step Instructions for Making a Cube Hammock

It takes time to make a cube hammock. So don’t give up in the middle and follow the instructions.

Step 1: Cutting The Fabric Equally

Cut six squares from the same size flannel pillowcases. Also, cut out six squares of fleece cloth the same length as the flannel. The two types of clothes provide insulation.

After cutting the clothes to size, it’s time to make the hanging loops. Use the four ribbons. The flannel and wool fabrics should be pinned together, with the inner fabric on top.

Step 2: Arranging and Sewing The Fabric

Now that it’s arranged properly, sew one side. Exclude sewing the right side, which will be turned inside out. Draw a circle inside the center of the fabric with anything circular.

Sew the traced circle and then cut it out. Be careful not to damage the seam. Like before, staple a flannel and wool cloth and stitch all sides. Do not make a hole this time.

Step 3: Placing The Fabric on Top of One Another

For the third side, repeat the whole sewing process and then staple-stitch the fourth side. Take the side that has a hole and the other that doesn’t. Place the half with the hole over atop the side. 

Place it in such a manner that both sides’ flannel is on top of one another. Now, pin and sew the right sides together. Snip the extra seam. This will make a ferret hammock pattern

Step 4: Final Stitching

Pin the second side with the first half with a hole. Sew them together. Similarly, stitch the side with no hole to the neighboring cloth and snip the excess seam. Pin one of the two remaining sides to the top. 

Include the ribbon while sewing on all four ends. Turn the hammock inside out and sew the bottom on all sides, including the ribbons. Finally, sew the bottom side together.

And that’s the hard process of making the cube hammock!

The cube design is a little difficult to make and takes a long time. It does, however, provide a warm indoor bedroom to slumber in. Making it a more upscale choice. To make your ferret’s cage more attractive, this is a terrific pattern to try!

And that is all there is to answer this brilliant question.


Do Ferrets Like Blankets?

Yes. If you want your pet ferret to have the absolute best comfort, you can provide a blanket. Blankets are the best option for your ferret to feel comfortable inside their cages. It’ll make them happy while they rest inside.

What Materials Are Good Bedding for Ferrets?

Ferrets mostly love soft and smooth textured feelings. That gives them the feeling of comfort inside any cage or place. Usually, wood shavings are used in the litter box. However, it is harmful to ferrets. Newspaper, wood pellets, and corn cobs are the perfect bedding for ferrets.

Do Ferrets Like Light or Dark When They Sleep?

Ferrets are partially nocturnal animals, they love to sleep in the dark. If they are exposed to light while sleeping, they can gradually develop a sleeping disorder. So, it is better to provide total darkness while they are in sleep.


That is all we have to discuss on how to make a ferret hammock out of a pillowcase. In the end, remember that your pet ferret should feel comfortable. 

If you still have difficulties, we would suggest you consult with a professional.

Till next time, best wishes!

Ryan Dugan
Ryan Dugan
Ryan Dugan

Ryan Dugan is a dedicated pet care professional who offers top-notch services for a variety of pet species. He has a soft spot for my own feline companion, Sophie. He is passionate about animals He shares his knowledge and experience on his blog to help other pet owners understand and care for their own beloved companions. Whether you need a pet-sitting service or advice on pet care, He is the go-to expert.

Articles: 140

Leave a Reply

Your email address will not be published. Required fields are marked *